No products in the cart.
Sordin Sharp/Share Hygiene sett, Gel
Sordin hygiene sett i gel
Hygiene sett i gel for ekstra god komfort.
Passer til følgende:
- Sordin Share
- Sordin Sharp
Sordin Supreme for MSA F2X-Trem bom mic TP120 savox
Beskytter hørsel og opprettholder kommunikasjon i nærmest alle miljøer
Egenskaper:
- Enkel tilkobling, kobles rett i PTT
- Svært enkel betjening
- Aktiv støyreduksjon, filtrer bort høye skadelige lyder
- Forsterker lyder som tale og andre viktige lyder, som kjøretøy i bevegelse og faresignaler som f.eks tom for luft signal på flaskesett
- Støydemping på mikrofon, tale fra deg blir renere og lettere å forstå for mottager
- Skrur seg automatisk av etter 4 timer, sparer batteri
- 600 timers batteritid, 2 stk AAA, lavt batteri varsel når ca 40 timer batteritid gjenstår
- Tåler 1 meter under vann i 30 min
- Militær modell, tåler svært tøff bruk og testet under de fleste tenkelige forhold
Specially adapted storage cases
Jatronic offers specially adapted storage cases when the headset is not in use.
These are especially suitable for iricomm 3.0 IP67 headsets, but can be adapted to other brands as needed.
Strømadapter 12 VDC 2,1x5,5 mm
Strømadapter for sigarettenner til 2,1×5,5 mm sirkulær plugg. 1,83 meter ledning.
Kompatibel med:
- Caltta bordlader (AC700)
- Hytera bordlader
- Icom bordlader
- Alle DC sirkulære konnektorer med + i senter
Syncro SV-10
Syncro
Syncro SV-10 er et hodesett og walkie-talkie i ett. Denne modellen er tilgjengelig som UHF, PMR og har 16 samtalekanaler. På grunn av sin unike design har dette walkie-talkie/headsettet et stort utvalg, med en overføringseffekt på 0,5 watt.
Syncro SV-10 UHF er en ultrahøyfrekvent walkie-talkie. Dette betyr at enheten er enkel å bruke både innendørs og utendørs. Kommunikasjonssignalet har ingen problemer med vegger eller travle bygninger, forbindelsen forblir utmerket slik at du alltid kan kommunisere tydelig med samtalepartneren din. Selvfølgelig hjelper den utmerkede lydkvaliteten til denne walkie-talkien med dette.
Innhold i pakken:
- Syncro SV-10 UHF walkie-talkie
- 850mAh Li-ion batteri
- Hurtiglader med USB-C
- Løst deksel
- Håndbok
TECPRO LS351 Loudspeaker station, Single circuit
Tecpro Communication system – Talkback loudspeaker stations
The LS351 derives power either directly from the 24V DC Tecpro line, or from an optional external 24V PSU. A green LED indicates power is present. Connection to the intercom system is via a pair of 3-pin XLR connectors which allow the LS351 to be ‘daisy chained’ with other user stations.
Series 2 Tecpro LS300 Loudspeaker Stations provide local monitoring of intercom circuits without the need to wear headphones. The built-in microphone makes them suitable for hands-free operation, allowing full-duplex simultaneous talk and listen conversations to take place. If required, a headset may be plugged in, disabling the internal microphone and speaker. LS300 Loudspeaker Stations offer single circuit operation as standard. Dual circuit versions are available on some models.
- Hands-free or headset operation
- Loudspeakers selected for clear voice reproduction
- Built-in flush-mounted electret microphone
- Microphone On/Off button offers push-to-talk or latching characteristics
- Acoustic feedback cancellation preset
- Side-tone preset for headset
- XLR 4-pin input socket for gooseneck microphone or headset
- Single and dual-circuit versions available on some models
- DC and 20kHz ‘Call Alert’ signaling send and receive
- 24kHz ‘Remote Mic Kill’ send and receive
- 28kHz ‘Override’ signal recognition for preset volume restoration
All Tecpro LS300 Loudspeaker Stations have carefully selected loudspeakers, for clear voice reproduction and a high quality, flush mounted electret microphone. The microphone, loudspeaker and associated controls are all mounted on a machined plate.
XLR Cables
- 27-923 TECPRO Single circuit cable – 3 metres
- 27-925 TECPRO Single circuit cable – 5 metres
- 27-930 TECPRO Single circuit cable – 10 metres
TECPRO LS352 Loudspeaker station, dual circuit
Tecpro Communication system – Talkback loudspeaker stations
This is similar to the LS351 but, in addition, can be connected across two intercom circuits. The LS352 can switch between monitoring circuit A or circuit B. The rear mounted intercom connections comprise two pairs of 3-pin and one pair of 5-pin XLR connectors for flexible ‘daisy chaining’ with other user stations
Series 2 Tecpro LS300 Loudspeaker Stations provide local monitoring of intercom circuits without the need to wear headphones. The built-in microphone makes them suitable for hands-free operation, allowing full-duplex simultaneous talk and listen conversations to take place. If required, a headset may be plugged in, disabling the internal microphone and speaker. LS300 Loudspeaker Stations offer single circuit operation as standard. Dual circuit versions are available on some models.
- Hands-free or headset operation
- Loudspeakers selected for clear voice reproduction
- Built-in flush-mounted electret microphone
- Microphone On/Off button offers push-to-talk or latching characteristics
- Acoustic feedback cancellation preset
- Side-tone preset for headset
- XLR 4-pin input socket for gooseneck microphone or headset
- Single and dual-circuit versions available on some models
- DC and 20kHz ‘Call Alert’ signaling send and receive
- 24kHz ‘Remote Mic Kill’ send and receive
- 28kHz ‘Override’ signal recognition for preset volume restoration
All Tecpro LS300 Loudspeaker Stations have carefully selected loudspeakers, for clear voice reproduction and a high quality, flush mounted electret microphone. The microphone, loudspeaker and associated controls are all mounted on a machined plate.
XLR Cables
- 27-923 TECPRO Single circuit cable – 3 metres
- 27-925 TECPRO Single circuit cable – 5 metres
- 27-930 TECPRO Single circuit cable – 10 metres
TITAN EX-MM50 Remote Speaker Microphone
TITAN EX REMOTE SPEAKER MICROPHONE
With two large Push-To-Talk buttons, enhanced control buttons and IP67 protection rating, the Titan EX-MM50-TA is the must-have Remote Speaker Microphone for users working in hazardous
environments . The Nexus and 3.5mm jack sockets makes headset integration easy and is the ideal solution for users needing to connect helmet audio systems with a portable radio.
Conpatible radios:
- Tait TP9300/9400
Alternatives and part number:
- Nexus configured for Titan/Savox Headsets EX-MM50-TA2-01
- Nexus configured for Peltor Headsets EX-MM50-TA2-02
- Nexus configured for NATO/David Clark Headsets EX-MM50-TA2-03
Titan HUC1 Firecomm Headset
The Titan HUC1 is an ideal helmet communication unit for MSA F1, F1SF and F2 helmets. The unit can be connected directly to a speaker microphone or a PTT Unit. The state of the art waterproof (IP67) electret microphone provides clear communication. Furthermore the HUC1 enables users of respiratory masks to fit the microphone close to the audio gateway of their mask.
Titan HUC2 Skull Microphone
The TITAN Skull Microphone provides clear communication in all environments. The Skull Microphone is an ideal accessory for users needing to communicate with co-workers while wearing structural fire helmets.
The Skull Microphone can easily be installed in most helmets with just the use of velcro tape. Both ATEX and NON-ATEX versions available.
The Skull Microphone comes as standard with mono loudspeaker, but stereo loudspeakers are also available.
Alternatives and part number:
- Nexus configured for Titan/Savox Headsets HUC2-TP120-01
- Nexus configured for Peltor Headsets HUC2-TP120-02
- Nexus configured for NATO/David Clark Headsets HUC2-TP120-03
Titan HUC5 Firecomm Headset
The HUC5 should be a permanent item for your fire and rescure communication setup when wearing a MSA Gallet F1SF or F2 helmet or Dräger HPS6200 and HPS4100 Pacific helmets. This comprehensive communcation device can be directly connected to a speaker micophone or a PTT using the Nexus connection.
The HUC5 comes in a stereo, single and listen only version for your helmet and critical communication needs.
Titan HUC6 Firecomm Headset
The Titan Modular Helmet Communication Device
This modular-based communication device delivers clear communication in all environments. The HUC6’s special 2-screw design makes it compatible with most protective helmet with just the use of an adapter. Titan offer a variety of adapters that are easily mounted onto the protective helmets and have an uncompromising fit.
This comprehensive communcation device can be directly connected to a speaker microphone or a PTT using the Nexus connection.
Alternatives and part number:
- Nexus configured for Titan/Savox Headsets HUC6-TP120-01
- Nexus configured for Peltor Headsets HUC6-TP120-02
- Nexus configured for NATO/David Clark Headsets HUC6-TP120-03